Updated Dew Wipe Replacement Option

Updated Option for Dew Wipe Replacement
***This video shows the driver side only removal and installation***

Tools Needed:
1. Phillips screwdriver
2. Surgical style hemostat forceps
3. 10mm and 13mm socket with rachet
4. Masking tape to hold screws to screwdriver while reinserting screws into new dew wipe

Prior to starting this process, do the following:
1. Cut away the rubber of the old outer dew strip for better access
2. Remove the inner dew strip
3. Mark the location of the screws that will be removed (white paint pen was used here)
4. Apply duct tape to the top edge of the inner window frame opening to
prevent the metal framework from scratching the glass
5. Remove the two nuts that hold the sideview mirror in place 6. Remove the front and
rear black rubber end caps of the window glass opening

This video is posted through the NIFE website www.fierofocus.com.

Copyright 2023 NIFE Fierofocus.com All Rights Reserved.
This video is a production of the Northern Illinois Fiero Enthusiasts. No copies of any part of this video may be, distributed, or sold without the prior consent of N.I.F.E. "Pontiac," "Fiero." the Pontiac symbol, and the Fiero Badge are all trademarked by General Motors Corporation. N.I.F.E. is not responsible for any information provided herein. Any and all adjustments made or information acted on are done at the sole risk of the individual. Privacy Notice: The Northern Illinois Fiero Enthusiasts will not sell or share your personal address or contact information with any outside vendors or other third parties. Your personal information is used only for conducting club related business by the board members of this club.

Privacy Notice: The Northern Illinois Fiero Enthusiasts will not sell or share your personal address or contact information with any outside vendors or other third parties.

Your personal information is used only for conducting club related business by the board members of this club.